Nedan visas de artiklar som hittades av vår snabbsök. Om du inte hittar det du söker tryck [ENTER] eller klicka på "Visa alla sökresultat" nedan.
Fri frakt eller hämta i butik! Gediget monterade och hantverksmässigt justerade. Gäller alla cyklar! 
Hitta rätt cykel
 

Scott Gambler 710 Frame set

SEK 26 095
Klicka för din storlek.
Visa storleksrekommendation.
Leverans.
från 0 kr
Läs mer.
Lager.
Ej i lager*
Läs mer.
Tillverkare.
Artikelnummer.
238850006 (S)
Övriga art.nr.
238850007 (M)
238850008 (L)
från 1 520 SEK/månad
The Gambler 710 frame is ou GSTAAD-SCOTT World Cup DH replica- a no-compromise DH weapon with custom race-tuned FOX suspension. The Gambler features lower and slacker geometry, a longer shock, a tuned leverage ratio, and can now run both 27.5" and 26" wheels.

Cykelspecifikationer
Ram Alloy 6061 Hydroformed custom butted PF BB107 / IDS X DH 12x150mm Dropout BB height and CST length adjustable ISCG05 Travel 210mm
Stötdämpare bak Fox DHX RC4 Coil Kashima Reb. / low-speed comp / Bottom out force adj. custom tuned / 267x89mm spring rates S 250 / M 300 / L 350
Tillbehör Syncros DH adjustable Headset semi integrated / 0°, +-1° or +-2° Fork bumper kit IDS X Dropout incl. Axle and Nut Standard and Shimano DM hanger CST/SST and DT protector
Vikt i kg (ram exklusive stötdämpare) 4.04kg
Vikt i lbs (ram exklusive stötdämpare) 8.90lbs

Ramgeometri
S S M M L L
BB setting low BB setting high BB setting low BB setting high BB setting low BB setting high
Head tube angle 63.0 ° 63.7 ° 63.0 ° 63.7 ° 63.0 ° 63.7 °
Head tube length 115.0 mm 115.0 mm 115.0 mm 115.0 mm 115.0 mm 115.0 mm
Top tube horizontal 549.7 mm 546.2 mm 595.4 mm 591.5 mm 633.6 mm 629.3 mm
Standover height 778.6 mm 783.6 mm 771.6 mm 777.1 mm 765.3 mm 771.3 mm
Bottom bracket offset -13.0 mm -3.0 mm -13.0 mm -3.0 mm -13.0 mm -3.0 mm
Bottom bracket height 343.0 mm 353.0 mm 343.0 mm 353.0 mm 343.0 mm 353.0 mm
Wheel base 1,175.8 mm 1,172.5 mm 1,205.8 mm 1,202.5 mm 1,235.8 mm 1,232.5 mm
Bottom bracket center to toptube center 336.0 mm 336.0 mm 333.0 mm 333.0 mm 331.0 mm 331.0 mm
Bottom bracket center to top of seattube 406.0 mm 406.0 mm 404.0 mm 404.0 mm 403.0 mm 403.0 mm
Seat angle 75.1 ° 75.9 ° 73.7 ° 74.6 ° 73.0 ° 73.9 °
Chainstay 425.0 mm 421.5 mm 425.0 mm 421.5 mm 425.0 mm 421.5 mm
Reach 712.0 mm 712.0 mm 712.0 mm 712.0 mm 712.0 mm 712.0 mm
Stack 385.0 mm 393.0 mm 415.0 mm 422.8 mm 445.0 mm 452.6 mm
Stem length 616.7 mm 611.7 mm 616.7 mm 611.4 mm 616.7 mm 611.2 mm

Beskrivning av utvalda cykelegenskaper
Wheelsize
Tracks differ, as do riding styles and riders. With that idea in mind, we tried to design a bike that allows you to decide on set up based on your specific needs. With the available geometry adjustments the Gambler can have almost the same geometry with either wheel size. Thanks to adjustable BB heights, chainstay lengths and head angles we were able to create a seriously fast bike regardless of whether you want to run 26” or 27.5” wheels. Why compromise if you don't have to?

IDS-X Dropouts. Simpler, stiffer, lighter
The IDS-X Dropouts have a unique axle and dropout interface which locks the axle into place. This design eliminates the need for pinch bolts on the rear axle. We were tired of the rear ends of bikes coming loose after long days in the bike park so we set out to find a solution. After many one off prototypes we found this solution in the form of eccentric and conical shapes on the axle and dropouts. These shapes key into each other and lock the rear end down tight. In addition, the stiffer feeling rear end provides for better and more consistent cornering traction over traditional axle/dropout designs.

Floating link
The heart of the Gambler is the Floating Link. Combining just the right amount of support with incredible comfort at high speeds, the linkage was optimized for use with the new FOX RC4. When FOX shifted to the smaller shaft on the RC4 we realized that a new kinematic was necessary. The Floating Link pivots around an imaginary floating point allowing the designers to fine tune all aspects of the leverage ratio enabling the shock and linkage to function in glorious harmony.This linkage allowed the engineers to decrease the shock hardware rotation from 36 degrees to 9 degrees on one end and 12 degrees down to 4 degrees on the other end. This not only increases durability but also improves small bump sensitivity. Furthermore, unlike most bikes on the market, the bearing loads are drastically decreased at the beginning of the shock stroke further enhancing traction performance.

Chain stay length adjustment
Adjustability has always been one of the Gamblers strong points over the years. The Gambler 700 is no different. The rear end has two chainstay length settings, providing for ideal setups anytime, anywhere. In the low BB setting, the longer 440mm setting is designed to work best for high speed tracks or riders who like a planted rear end. The @Brendog1 approved, shorter 425mm chain stay setting gives the bike a lively feel and works better on tighter tracks. With the higher BB setting, the available chain stay lengths are 421mm and 435mm.

Adjustable head angle
The Gambler 700 has a stock head angle of 63 degrees. Thanks to the provided Syncros Angled Headsets in 1 degree and 2 degrees you have access to a range 61 degrees to 65degrees. This range of head angles provides the opportunity to choose the ideal setup for any racer on any track. Horses for Courses.

Adjustable bottom bracket height
The BB height on the Gambler 700 is adjustable by 10mm to accommodate for rider preference as well as wheel size. If you want to set up your rig to carry speed through a corner with a low BB or to smash on the pedals to get back up to speed on a higher BB, you have the flexibility to choose. With a 27.5” wheel set up, you can either have a 343mm BB height in the low position with or a 353mm BB height in the high position, enabling the rider to pick from a low and slack carver of a bike or a pedal smashing flat track weapon. The 26” setup works much the same way with a 341mm BB height in the high position or a 331mm BB height in the low position.

Integrated fork bumpers
The integrated fork bumpers on the Gambler 700 not only protect the cables from getting pinched by the fork in a crash but also protect the frame from the fork in that very same crash. Gone are the days of dimpled top tubes and pinched cables. Lighter, simpler and no room for error- these are the principles behind the new Gambler 700 fork bumpers.
Liknande artiklar.